The NPT Threaded Metal Cable Press is suitable for tightness application and its use does not depend on the use of fixing nuts, working in the base of the fitting between the cable press and the hole of the box or equipment.
Model Cable Screw Metal NPT Thread
This model (abbreviated by National Pipe Thread) is an American standard conical thread and is described in inches. An example of its use is the tightness in the kitchen gas valve.
The metal line has superior mechanical resistance to plastic cable glands.
To ensure the sealing of your electrical installation, count on the KrausMuller Line!
Material : nickel plated brass, PA 5 and injectable rubber;
Standard : DIN 46320 – EN 50262;
Protection : IP 68
Operating Temperature : Static: -40ºC to 100ºC and 120ºC for a short time.
Dynamic : -20ºC to 80ºC and up to 100ºC for a short period of time.
Is suitable for threaded holes.
| ROSCA NPT | ||||||||
| Código | Rosca NPT | ø dos cabos | A mm |
B mm |
C mm |
Diâmetro do furo da montagem mm |
Chave mm |
|
| Mínimo | Máximo | |||||||
| mm | mm | |||||||
| KM04290 | NPT 1/4” | 3 | 6.5 | 19 | 7 | 13.6 | 14.1 | 14 |
| KM04291 | NPT 3/8” | 4 | 8 | 19 | 8 | 17 | 17.5 | 18 |
| KM04292 | NPT 1/2” | 6 | 12 | 22 | 8 | 21.2 | 21.7 | 22 |
| KM04293 | NPT 3/4” | 13 | 18 | 25 | 9 | 26.5 | 27 | 30 |
| KM04294 | NPT 1” | 18 | 25 | 29 | 11 | 33.2 | 33.7 | 40 |
| KM04295 | NPT 1.1/4” | 25 | 33 | 35 | 13 | 41.9 | 42.4 | 50 |
| KM04296 | NPT 1.1/2” | 32 | 37 | 37 | 14 | 48 | 48.5 | 57 |
| KM04297 | NPT 2” | 37 | 44 | 38 | 14 | 60 | 60.5 | 64 |
| KM09183 | NPT 2.1/2” | 42 | 52 | 38 | 14 | 72.6 | 73.1 | 78 |
| KM04299 | NPT 4″ | 77 | 84 | – | 20 | 113 | 113.5 | 135 |
